KTuner End-User Board Revision 1 Tuning System

The KTuner Revision 1 End-User board tuning system for use with K series engines allows engine tuning of K series engines by any end user (this is you if you are reading this). The KTuner End-User board system consists of a circuit board that is installed into your ECU along with software for use with the board. The system is tunable via laptop with a simple USB cable connection. This will allow you to reprogram your ECU for performance gains and to get the most from your engine modifications. Many engine basemaps are included with the software to choose from to begin with. You can even start with one of the KTuner Reflash files, then tune or make changes from there as desired. See the links below for features on each application:

What vehicles can this be used on?

• 02-04 RSX/02-05 EP3 with the use of a conversion harness
• K20 and K24 swapped vehicles
• 05-06 RSX Type-S, Base Auto and Manual
• 04-06 TSX
• 03-05 Accord Auto and Manual
• 06-07 Accord Drive By Wire Auto and Manual
• 03-06 Element Auto and Manual

A preview of the software is available on the KTuner site here: http://ktuner.com/ktuner-software/

** FREE installation into your ECU when purchased from us **

Installing the KTuner End-User board into the ECU requires professional, surface mount component soldering skills. We HIGHLY recommend you don't attempt the install unless you are very experienced with surface mount soldering. To make sure you have a trouble-free experience with this system, we offer to install the system into your ECU for FREE when purchased from us. This board is designed to be used with any of our HA Motorsports KTuner prepared K series ECU's, or your own ECU if you'd prefer to send yours in for installation (please check at the application links above to make sure your ECU is compatible). For a simple, all in one solution, see our KTuner End-User ECU packages!

Includes:

• One KTuner end user board
• One KTuner end user software license (paired with system). The KTuner software can be downloaded 
• Pair of KTuner decals
• New USB cable for connecting to the system
• Free installation into customer provided ECU, or into one of our KTuner ready ECU's. See below for information on sending your ECU to us for installation.

Bluetooth option:

The KTuner Rev1 End-User board accepts the KTuner Bluetooth Add-On Module. We can include this with your new KTuner End-User system when you add this to your order.

Tuning with KTuner will require the following:

• KTuner end-user system (this item).
• KTuner ready/socketed K series ECU (see our prepared ECU's, or options for sending your ECU in for installation).
• Jumper harness on some applications (02-04 RSX, 02-05 Civic Si - see application list above).
• Laptop Computer running Windows XP SP3, 7, 8, 8.1, or Windows 10, and atleast 1GB RAM or better is recommended.