|
ECA-2 CAN Bus Analog Outputs
Ethanol content and temperature analog outputs are available as part of the ECA-2 CAN Bus. The flex fuel sensor does not provide these outputs. We have created the ECA-2 CAN Bus to provide these outputs making use of E-85 easier with after market engine control modules and data logging systems.
| Analog Outputs |
Signal |
Range |
| Ethanol Percentage |
0-5 Volts |
0% to 100% |
| Fuel Temperature |
0-5 Volts |
-40 to 125 °C (-40 to 257 °F) |
|
| Ethanol % = 20 * Voltage |
Fahrenheit Temp. = -40 + 59.4 * Voltage |
Celsius Temp. = -40 + 33 * Voltage |
 |
 |
 |
Optional real time Zeitronix E% Ethanol Content Gauge
   
Optional real time Zeitronix E% Ethanol Content and Fuel Temperature Gauge
 
The E% gauge is only 3/4" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be surface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The E% Gauge base allows the gauge to be mounted in a standard 2†1/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size). Check out the gallery for gauge installation pictures.
The E% Gauge plugs into the ECA-2 GAUGE port. Power and serial data is supplied directly through the single connection - there are no additional +12V or ground wires. The E% Gauge cable length is 5 ft (1.5m).
ECA-2 is required for E% Gauge operation.
ECA CAN Bus KIT
We offer new Flow Through Flex Fuel Sensor as a part of ECA-2 CAN Bus Kit, which includes the Ethanol Content Analyzer, Flow Through Flex Fuel Sensor and ECA Harness with a correct connector. ECA Kit can be purchased directly from our order page. |
|
What's your ethanol percentage?
The ethanol content of E85 fuel can vary from 60% to 92% ethanol. A fill up with E85 can drastically change the mix of fuel in your vehicle. For performance drivers determining actual ethanol content of E85 is essential to maximizing an engine tune and horsepower. |
|
Why know your ethanol percentage?
E85 has the equivalent octane rating of 105 octane gasoline. Higher octane fuel is more resistant to knock allowing for more aggressive ignition timing, higher compression and increased engine power over gasoline itself. The Zeitronix Ethanol Content Analyzer helps you get the most out of your engine and fuel.
What are the sizes of the flex fuel sensor inflow and outflow lines?
Zeitronix Flow Through Flex Fuel Sensor both tubes are 0.37" and 0.5" at the flange.
The usual mounting location for the sensor is the return fuel line. Make sure the sensor is filled completely with fuel.
A professional installation by a shop familiar with your vehicle and it's fuel system is required. Always check for fuel leaks!
Flex fuel Sensor Technical Specification:
| Measuring range: |
0…100% Alcohol (ethanol) in fuel mixtures |
| Sensor Accuracy: |
5% of the mixture ratio |
| Output characteristic: |
Linear, Frequency, Duty Cycle |
| Operating temperature: |
Environment -40°C… +125°C, Fuel -40°C… +90°C |
| Maximum fuel pressure: |
10 bar, (145 psi) |
| Maximum pressure drop: |
0.1 bar, (1.45 psi) |
| Maximum flow: |
200 l/h |
| Supply voltage: |
6…18 Volts DC |
| Sensor Temperature error: |
< 1.5% |
| Response time: |
< 250 ms after power on at any temperature |
| Design: |
Suitable for the installation in motor vehicles, independent of position. Housing is waterproof. Always check for fuel leaks! |
|
